ScanTech’s high pressure compressors
ScanTech’s high pressure compressors are fully containerised units, with a rated compressed air flow of 1070 acfm and an operating pressure range between 150 and 350 psig. The container is certified to DNV 2.7-1, the globally accepted standard for mobile offshore containers.
Discharge air from the compressor is cooled down to 10 degrees Celsius above ambient air temperature and then filtered to remove any oil carryover to less than 0.01 mg/m³, making it technically oil free.
No compromise in performance
Extra-large coolers have been fitted to allow the compressor to work in very high ambient air temperatures without compromising on the container footprint.
Applications of high-pressure compressors:
- High oil flow rate well testing or land applications where there is a long pipeline run between the burner and the compressors
- Air drilling, under-balanced drilling and nitrogen generation
- Pipeline dewatering, pigging and testing
- Decommissioning - fluid lifting, slurry lifting and pneumatic cutting tools
Interested in learning more about our high pressure compressors?
